Home / Case Studies / Trh Zf Sevilla Spain 6326-M-C4-J20A Insulated Deep Groove Bearing
VFD MOTOR

Trh Zf Sevilla Spain 6326-M-C4-J20A Insulated Deep Groove Bearing

Alumina insulated bearings stop shaft-current corrosion in high-power motors.
50~200μm
Adjustable coating thickness
3000V DC
Max withstand voltage
3.5times
Bearing service life
7200h @12000r/min
No coating peeling

Client Profile & Background

Trh Zf Sevilla is a Spanish large variable frequency motor maker supplying high-power industrial drive motors for pump, fan and metallurgy equipment.

Frequency conversion generates alternating stray shaft current forming conductive loops; sparks erode grease, steel balls and raceways, causing early scrappage.

Project Targets

Supply standardized insulated bearings meeting EU electrical safety standards, with adjustable coating thickness fitting existing assembly tolerances.

Engineering Challenges

Thickness vs assembly

Thin coating fails insulation; over-thick coating interferes with motor assembly tolerance under high-speed abrasion.

Zero-pinhole spraying

Alumina spraying requires no pinholes; tiny pores trigger insulation breakdown under high voltage.

Performance balance

Insulation capability, radial clearance and dynamic load capacity must be guaranteed simultaneously.

Custom Alumina Insulation Coating Solution

Adjustable alumina coating

Thickness adjustable 50–200μm, withstands 1000V spark impact with DC breakdown up to 3000V.

Stable insulation resistance

≥100MΩ at 500V DC and ≥50MΩ at 1000V DC, stable through long high-speed operation.

High-adhesion plasma spraying

Eliminates surface pinhole defects that cause voltage breakdown inside the coating.

Verified before delivery

Prototype withstand voltage and insulation durability tests, with official batch test reports.

These bearings cut our motor after-sales maintenance cost by 60 percent.
TZ
Trh Zf Sevilla
Motor Design Manager, Spain

Project Results

Stray current corrosion faults were eliminated, bearing life rose 3.5 times, maintenance cost dropped 60%, and all sets passed EU electrical safety certification.

Ready to Upgrade Your Heavy Machinery Bearings?

EGEN Bearing supports full OEM & ODM customization of spherical roller bearings for elevator, mining, metallurgy, and port heavy machinery.
Talk to an Engineer
中文
English

© 2026 EGEN Bearing Technology Co., LTD. All Rights Reserved. | Site powered by matchPages | Privacy Policy | Sitemap